Abragrit
Description
During melting of ore concentrates an iron silicate is formed. This is passing a groove and is granulated at a temperature of approximately 1250°C, using a temperature-controlled pressurized water jet. After cooling down in a tank with fresh water, the fine particles are separated from the granulate manufactured in this way. Iron silicate is produced in accordance with DIN EN ISO 11126- 3. It is a vitreous amorphous slag, it does not absorb water. During the manufacturing of the abrasive no crushing or grinding procedures are included. Therefore, the single abrasive particle is not broken up and retains its extreme hardness and tenacity which is the case for all particle sizes.
Used as blast cleaning abrasive for all applications fields in conventional corrosion protection on almost all surfaces. Suitable for SA-3, SA-2½, SA-2 and SA-1.
Grain sizes
| AG250 | 0,1 - 0,4 mm | AGX | 0,5 - 1,6 mm |
| AG06 | 0,1 - 0,6 mm | AG25 | 0,2 - 2,5 mm |
| AG08 | 0,2 - 1,0 mm | AGST | 0,5 - 2,5 mm |
| AG15 | 0,2 - 1,5 mm |
Packing
- 25 kg bags, on shrinkfoiled export pallets
- Strong woven polypropylene big bags, with 4 lifting loops
- Other packing options on request
Product categories
Expendable abrasives
Industry solutions
Shipbuilding and shiprepair
Oil, gas and petrochemicals
Wood construction
Infrastructure
Facade cleaning and monument protection
Building construction
Downloads
Contact
Would you like to find out more about the products we sell and their applications? Request further information or a quotation. We look forward to hearing from you.
EP Power Grit GmbH
Duisburger Straße 170
46535 Dinslaken